Maintenance Advice for the E-Bike Motor

Maintenance Advice for the E-Bike Motor

The investment that e-bikes are, they should be treated as such. After all, if you maintain your e-bike properly, it can save you a tonne of money over a long period of time. However, many consumers are unaware of the best ways to safeguard their investment. Fortunately for you, there are certain best practises for protecting e-bikes, and we'll go over a couple of them in this article.

The e-bike motor is one important element of any e-bike. When it comes to importance, it ranks right up there with the battery. This means that riders should take all reasonable precautions to safeguard their vehicle and maintain it in excellent condition. One of the most expensive and challenging parts to replace on an e-bike is the motor. This challenge alone ought to serve as motivation to carry out regular e-bike maintenance, adhere to optimal e-bike practises, and safeguard the e-bike motor at all costs.

Avoid Riding Your E-bike In The Water

Trees require water. But e-bikes don't. That's all there is to it. You risk getting water inside the motor case if you ride an e-bike through deep water or leave it out in the rain. This will cause it to corrode internally over time and seize up in usage. The worst aspect is that you might not anticipate it. It will be challenging to notice the rust developing and the water damage because the motor is encased. Avoiding water entirely is your best course of action as a preventative measure.

This holds true if you're riding your electric bike on a hitch rack. If at all possible, or if you know you'll be riding through bad weather, invest in an e-bike cover and sling it over your bike while it's mounted to the rack. Even though driving through a thunderstorm may be unavoidable, you can at least protect your e-bikes from the majority of the rain by covering them with a waterproof cover and bungee straps.

Fahrbike e-bikes are built to resist some water exposure, but when it comes to putting the quality of your e-bike at danger, it's best to be safe than sorry. If you do discover that you have let too much water inside your bike, dry it off as quickly as you can and put it somewhere dry so that the water may evaporate from the bike's crevices.

Avoid Letting Your E-Bike Rust

When metal is exposed to air and moisture, rust eventually develops. It is more prone to rust earlier the more air and moisture it is exposed to. It is merely a property of materials made of metal. However, there are steps you can take to prevent or reduce this from happening.

E-bikes should, as we previously noted, try to stay out of water and in the rain. Storing your bike indoors is one way to make sure it remains dry. Look for a covered porch or awning if you are unable to store it inside. If you're still having trouble, look for a garage or shed, or ask a neighbour if you can borrow one of theirs for a modest price.

Many e-bike users might also be prepared to offer some storage space to another biker during the winter or rainy seasons. Whatever you do, avoid leaving your bike outside for a lengthy period of time exposed to the weather since this may cause the motor to rust and could harm the electric battery.

Leave The Factory Settings Alone

The motor may overheat or work harder than necessary if the factory settings are changed in an unintended manner. Motors are rated for particular speed and temperature working ranges. Applying after-market modifications to your e-bike runs the risk of damaging the motor or nullifying the manufacturer's warranty. When riding your e-bike, it is preferable to leave the factory settings in place.

Regularly Clean Your E-Bike

Don't let mud, dust, filth, or other debris collect on your bike. You should be very careful about how you clean your e-bike, though, in a manner similar to the problem with the rain and water. It's a good idea to clean and dry your bike on a regular basis, but you don't need to soak it or immerse it in water. It only requires a sponge that has been mildly dampened and a fast towel dry to maintain the parts clean. Any more than that runs the danger of harming the motor's internal parts.

Maintain the Pressure in Your Tires

Although it may seem unusual to discuss tyre pressure in a piece discussing motor performance, it is actually highly pertinent. Your bike will have to work more because of the lower tyre pressure. This applies to the brakes, batteries, and motor. The motor will run smoothly and according to plan if the tyres are inflated to their recommended levels.

There are numerous ways that tyres can lose air. The tyre pressure may decrease as a result of temperature changes and frequent riding. Tires normally lose a little amount of air over time since they are not an airtight system. To determine the proper PSI, see the instructions or the side of your tyre. Using an air pump and gauge, check your pressure once a month and top it off as necessary.

The engine won't have to work as hard if you keep your tyres inflated and under pressure. This will keep the motor operating smoothly and quietly, especially on hot summer days.

These motor maintenance advice should serve as a solid starting point for maintaining your motor in peak condition. Keep your attention on avoiding having water contact your bike. This is a wise advice to always bear in mind. You can delay the emergence of rust on your bike by avoiding getting it wet. Don't change the default settings on your bike, and wash it with mild soap and a soft sponge. Last but not least, maintain correct tyre inflation to ensure that the motor and battery operate at their best. Your e-bike motor will run efficiently for many years if you abide by these recommendations!

Back to blog


Promotions, new products and sales. Directly to your inbox.


Buying tips Cargo & Utility Commuting E-bike basis eBike Fahrbike Life Guide Knowledge Knowledge & Guide News Off-Road E-bike basis Product Product Features Promotion Roadster73 Roadster73 Plus UrbanCarry Pro

Recommended products